iFlight iPower GM5208-12 GM5208-24 Бесщеточный карданный двигатель Вал 12,6 мм Двигатель модуля БПЛА/Поворотный стол двигателя модуля воздушного лидара
Description
Description：
The GM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras.
This motor is designed for large-scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.
The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
GM5208-12 Specification:
Model: GM5208
Motor Out Diameter: Ф63±0.05mm
Motor Height: 22.7±0.2mm
Hollow Shaft(OD): Ф15-0.008/-0.012 mm
Hollow Shaft(ID): Ф12+0.05/0 mm
Wire Length: 610±3mm
Cable AWG: #24
Motor Weight: 195±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 20V
No-load volts: 0.09±0.1 A
No-load Rpm: 456~504 RPM
Load current: 20V
Load volts: 1A
Load torque(g): 1800-2500
Motor internal resistance: 15.2Ω±5%（Resistance varies with temperature）
High voltage test: DC500V 10mA @1sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤40W
Working current: 3-5S
Working temperature: -20~60℃;10~90%RH
GM5208-24 Specification:
Model: GM5208-24
Motor Out Diameter: Ф59.5±0.05mm
Motor Height: 31.2±0.2mm
Hollow Shaft(ID): Ф12.6+0.05/0 mm
Motor Weight: 204±0.5g
No-load Rpm: 396~436 RPM
Motor internal resistance: 13.7Ω±5%（Resistance varies with temperature）
Specifications
| Option | Values |
|---|---|
| Type |
|
Product Details
Description：
The GM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras.
This motor is designed for large-scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.
The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.
GM5208-12 Specification:
Model: GM5208
Motor Out Diameter: Ф63±0.05mm
Motor Height: 22.7±0.2mm
Hollow Shaft(OD): Ф15-0.008/-0.012 mm
Hollow Shaft(ID): Ф12+0.05/0 mm
Wire Length: 610±3mm
Cable AWG: #24
Motor Weight: 195±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 20V
No-load volts: 0.09±0.1 A
No-load Rpm: 456~504 RPM
Load current: 20V
Load volts: 1A
Load torque(g): 1800-2500
Motor internal resistance: 15.2Ω±5%（Resistance varies with temperature）
High voltage test: DC500V 10mA @1sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤40W
Working current: 3-5S
Working temperature: -20~60℃;10~90%RH
GM5208-24 Specification:
Model: GM5208-24
Motor Out Diameter: Ф59.5±0.05mm
Motor Height: 31.2±0.2mm
Hollow Shaft(OD): Ф15-0.008/-0.012 mm
Hollow Shaft(ID): Ф12.6+0.05/0 mm
Wire Length: 610±3mm
Cable AWG: #24
Motor Weight: 204±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 20V
No-load volts: 0.09±0.1 A
No-load Rpm: 396~436 RPM
Load current: 20V
Load volts: 1A
Load torque(g): 1800-2500
Motor internal resistance: 13.7Ω±5%（Resistance varies with temperature）
High voltage test: DC500V 10mA @1sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤40W
Working current: 3-5S
Working temperature: -20~60℃;10~90%RH
Package included:
GM5208 gimbal motor x 1pc
