HappyModel Crux3 1S ELRS 3inch Toothpick Built-in F4 FC SPI ELRS Caddx Ant EX1202.5 Motor FPV RC Racing Toothpick Drone Insta360

Description

HappyModel Crux3 1S ELRS 3inch Toothpick Built-in F4 FC SPI ELRS Caddx Ant EX1202.5 Motor FPV RC Racing Toothpick Drone Insta360 ============================================================ Noticed: Not include the Insta360 go2 or CaddxFPV peanut camera. Features: 40gram 1s brushless Toothpick drone AIO Flight controller with ELRS Receiver and 5.8G VTX CADDX ANT Camera New 1202.5 KV11500 brushless motor Recommend to use 1s 450mah/650mah/660mah/720mah battery Compatible with CaddxFPV Peanut and Insta360 GO2 Carrying Caddxfpv peanut Got 4.5 minutes flying time with 1s 650mah battery Specifications: Brand Name: Happymodel Item Name: Crux3 1S ELRS Wheelbase: 115mm Size: 97mmx97mmx35mm (without propellers) Weight: 40g(without battery) Package includes: Item Name Crux3 Frame and canopy ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver Happymodel EX1202.5 KV11500 brushless motor Gemfan 75mm bi-blade Propellers(4cw+4ccw) Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera 5.8G 25mw~200mw 40ch vtx (Flight controller built-in) Screw Driver Propeller disassemble tool 3D Printed canopy for Insta360 GO2 and CaddxFPV Peanut Happymodel Handbag Mode: EX1202.5 KV11500 Configu-ration:9N12P Stator Diamter:12mm Stator Length:2.5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ14mm*14.5mm Weight(g):4.4g No.of Cells(Lipo):1S Propellers Gemfan 75mm Center Thickness:5mm Prop Diameter:75mm Center Hole diameter:1.5mm Pitch:0.9in Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BECFlight controllerfirmware target: CRAZYBEEF4SX1280 Onboard 4in1 ESC MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT300 Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHzAntenna : SMD antenna Telemetry output Power: <12dBmReceiver protocol to flight controller:  CRSFCould bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest Onboard 5.8g VTX Output power: 25mw~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race bandSmartaudio ready Caddx ANT 1200tvl camera Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.) TECHNICAL SPECIFICATIONS • MCU:STM32F411CEU6 (100MHZ, 512K FLASH) • Sensor: MPU-6000(SPI connection) • Size: 97mmx97mmx35mm (without propellers) • Weight: 40g(without battery) • Weight: 2g (N.W.) • Frequency: 40CH • Frequency: 5.8GHz 5bands 40 channels • Lens: 1.8mm • Package includes: AVAILABLE OPTIONS Crux3 ELRS PRODUCT INFORMATION Brand: HappyModel Category: FPV Drone Wholesale Price: US $122.73 ————————————————————————————————————————