Разрядное устройство для аккумуляторов StoreSafe Smart Lipo XT30 XT60 2–6S

GET TO KNOW VIFLY StoreSafe

VIFLY StoreSafe is a smart lipo battery discharger that can intelligently discharge your battery to storage voltage.With built-in advanced algorithm and the temperature sensor, it can keep the highest discharge rate in an appropriate temperature range.The heatsink would effectively dissipate the heat to prevent the discharger from overheating

1. XT60/XT30 Input

2. Red LED

3. Blue LED

4. Green LED

StoreSafe would recognize the battery type automatically and indicate it with different LED lights.

LED Indication

Green LED

Blue LED

Red LED

Battery Type

×

●

7.4V(2S)

11.1V(3S)

14.8V(4S)

18.5V(5S)

22.2V(6S)

Note: When the LED status does not match the above table, please stop using StoreSafe immediately and contact us.

Operation

Before using StoreSafe, please make sure that the voltage of each battery cell is higher than 3.95V.

After plugging in the battery, the LED that indicates the status will flash for about 5 seconds and then enter the discharging state. If the LED status not indicates correctly, please disconnect the battery immediately.

The StoreSafe will stop discharging when your battery reaches storage voltage (3.85V±0.08V / cell) and then goes into an ultra-low leakage current (<10uA)

Specs

Working Voltage 7.9 - 26V(2S-6S)

Discharging Power 1W

Turn-off Current < 10uA

Storage Voltage 3.85V±0.08V / cell

Connector XT60 / XT30

Weight 8g(XT60) / 5g(XT30)

Size (L x W x H) 37 x 16 x 10 mm(XT60) / 32 x 15 x 10 mm(XT30)