Diatone Mamba F722APP WIFI Контроллер полета с OSD 5 В 9 В/3 А Датчик тока BEC Blackbox 16M 30,5 мм F Racing Drone Geprc iflight

Dear Russian customers and friends, due to the poor customs clearance in Russia in recent transactions, please choose "aliexpress standard shipping" when ordering

For Russian customers

Recommended use: AliExpress Standard Shipping

Not USE: AliExpress Standard Shipping (PUDO)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------                                                                                

Specification

MAMBA F722 APP MK1 I2C WIFI

FIRMWARE TARGET /CONFIG: MAMBA F722 I2C
Diagram Link From Help Centre Link

Note:Since STM32F722 heat large , please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.

Update Details:

BT to WiFi
USB power supply can use receiver, OSD
Add a group of I2C pads (SCL SDA)
Add inverter Dual-Way TX serial port
Add 2812 LED switch function, key can turn off led
Add 4 corner LED interface to support BF led and Mamba led
Upgrade to stronger type-C, optimize pad position



FC Specifications

MCU: 216MHz STM32F722RET6 32BIT
IMU: MPU6000
Barometer: No
OSD: BF OSD
Blacbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: RX6
LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V

LED Controller:BF LED/MB LED( 4 Set 2812 LED)
WIFI: SpeedyBee APP
Smartaudio: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
TVS Protection: Yes
BEC: 5V 2.5A & 9V 2A (Max 3A)
MOUNTING: 30.5mm/M3 WEIGHT: 9g
Supply :
8pin sh1.0 *1

Smartaudio: Yes
Buzz: Yes

Input: 3~6S Lipo (12.6~25V)
VTS Protection: Yes